Tag Archives: black

Over Dyeing with Black

560123_605299336164920_911094343_n

Heather models a Rainbow Spiral Black Over Dye by Up and Dyed

One of the most enduring color combinations that I have marketed over the years is the Rainbow spectrum with a black over dye spiral, and its cousin, the black over dyed rainbow fan.

541493_605298162831704_1224273141_n

Eric in a Rainbow Fan with Black Over Dye by Up and Dyed

Over Dyeing with black changes the entire dynamic of the rainbow spectrum, adding depth, contrast and motion to the eye-pleasing color sequence of the rainbow. It is common for patrons to ask if this process began with a black garment to achieve this end result.  No, it began life as a white garment. It is probably my most requested secret. If I had secrets.

Over dyeing with black is doing exactly that==  Applying black dye over fabric already dyed another color.  

  • Mix the black dye powder at the ratio of 1 Tblsp of dye powder and 1 Tblsp of table salt per 4 ounces of warm water.
  • Thickener can be added to the black dye to reduce spreading.
  • The garment is dyed to the saturation point on both sides in the 6 colors Yellow, Orange, Red, Purple, Blue, and Green.
  • Allow dyed item to batch for 10 minutes.
  • Apply a heavy over coat of black to ONE side of the garment.
  • Leave the item black side up on a drip rack.
  • Allow item to batch for 12 – 24 hours.
  • Wash out in very hot soapy water.

Another method for over dyeing with black is to dye or tie dye a garment, wash it out, re-pre-soak, then re-tie using arashi shibori resist techniques.  The over dye with black in shibori creates stunning contrast.

Recently, a patron requested an earth with a black over dye rainbow fan.  I took pictures along the way to share with you.  My camera is not the best and I am a poor photographer, but perhaps the lesson is illustrated well enough to follow.

GE DIGITAL CAMERA

  1. The globe was painted using thickened Turquoise and Kelly Green fiber reactive dyes on the waist of a pre-soaked tee shirt, directly below the sleeve.
  2. Shirt was allowed to batch for 48 hours or until the dye is completely dry.  
  3. Re-dampen garment with water in a spray bottle, protecting the globe image from the spray.
  4.   Accordion pleated around the globe.
  5. Place bindings about two inches a part, the length of the garment.

GE DIGITAL CAMERA

Dye in the rainbow spectrum repeating pattern.

GE DIGITAL CAMERA

Black dye covering one side.

GE DIGITAL CAMERA

Finished product.

I hope you found this information useful.  If so, please consider making a donation to help keep my site advertisement free.

Advertisements

8 Comments

Filed under How to, Using Fiber Reactive Dyes